Physical Properties

Basis Weight or Grammage The basis weight, substance or grammage is obviously most fundamental property of paper and paperboard. The Basis weight of paper is the weight per unit area. This can be expressed as the weight in grams per square meter (GSM or g/M²), pounds per 1000 sq. ft. or weight in Kgs or pounds per ream (500 sheets) of a specific size. Paper is sold by weight but the buyer is interested in area of paper.

The basis weight is what determines, how much area the buyer gets for a given weight. e.g. if basis weight is 50 g/m2, for every 1 kg weight, the buyer gets 20 m². When the basis weight is expressed as ream weight, it tells the buyers how many reams he/she getting for a given weight. For papermaker basis weight is important from point of view of production rate. For a given machine deckle and machine speed, the production rate per day in MT will be = Machine Deckle (m) * Machine Speed (m/min) * Basis Weight (g/M²) * 1440/1000000. Papermaker always strive to get all desired properties of paper with minimum possible basis weight. All paper machines are designed to manufacture paper in a given basis weight range. Tighter the range, more efficient will be the machine operation. The standard procedure of measuring basis weight is laid out in  TAPPI T 410, SCAN P6, DIN53104 & ISO: BSENISO536

Typical Grammage Values
Grade	g/m2
Newsprint	40 - 50
Cigarette Tissue	22 - 25
Bond	60 -90
Paperboard	120 - 300
Accepted trade tolerance +/- 5%

Bulk and Density Bulk is another very important parameter of paper particularly for printers. Bulk is a term used to indicate volume or thickness in relation to weight. It is the reciprocal of density (weight per unit volume). It is calculated from caliper and basis weight. Bulk (cubic centimeter/g) = Thickness (mm)* 1000/ Basis Weight (g/m²). Sheet bulk relates to many other sheet properties. Decrease in bulk or in other words increase in density makes the sheet smoother, glossier, less opaque, darker, lower in strength etc. High bulk is desirable in absorbent papers while lower bulk is preferred for printing papers particularly bible paper, dictionary paper etc. Book Bulk: Book bulk is defined as the overall thickness in mm of a given number of paper sheets. The bulking number is defined as number of sheets required to bulk 25 mm or approximately 1". The standard procedure of measuring book bulk is laid out in TAPPI T 500, SCAN P7 DIN53105, ISO 534, BS: EN ISO20534.

Percentage Air Volume in some Grades of Papers
Grade	Percentage Air Volume
Groundwood	63.1
Newsprint	53.1
Greaseproof	43.2
Bond	34.2
Glassine	13.0

Caliper or Thickness For a given basis weight, thickness determines how bulky or dense paper is. A well beaten/refined pulp, short fiber pulp such as hard wood or straw pulp, highly filled or loaded paper will show lower thickness for given basis weight. Thickness or Caliper of paper is measured with a micrometer as the perpendicular distance between two circular plane parallel surfaces under a pressure of 1 kg./ CM². Uniform caliper is good for good roll building and subsequent printing. Variations in caliper can affect several basic properties including strength, optical and roll quality. Thickness is important in filling cards, printing papers, condenser paper, saturating papers etc. The standard procedure for thickness measurement is explained in TAPPI T 411.

 

Typical Thickness Values
Grade	μm
Newsprint	60 - 80
Office/Business Paper	105 - 110
Blotting Paper (230g/m2)	540 - 590
Tracing Paper (90g/m2)	78
Label Paper (79g/m2)	63
Tissue(28g/m2)	125
Accepted trade tolerance +/- 10%

 Curl Paper curl can be defined as a systematic deviation of a sheet from a flat form. It results from the release of stresses that are introduced into the sheet during manufacture and subsequent use. Paper curl has been a persistent quality issue and is increasingly important for paper grades being subjected to high speed printing, xerography and high precision converting processes. There are three basic types of curl, mechanical curl, structural curl and moisture curl. Mechanical curl develops when one side of the paper is stretched beyond its elastic limits. One example of this is the curl in the sheet which forms near the centre of a roll. Structural curl is caused by two-sidedness in the sheet, that is a difference in the level of fines, fillers, fiber area density or fiber orientation through the sheet thickness. Moisture curl can develop when the paper sheet is being offset printed. One side of the sheet may pick up more moisture than the other, the higher moisture side releases the built in drying strains and the paper will curl towards the drier side. For more details on Curl, please read Curl Basics by Chuck Green The standard procedure for curl measurement are explained in TAPPI T 466 & T520 Dimensional Stability Cellulose fibers (main constituent of paper) swell in diameter from 15 to 20% from dry condition to saturation point. Since most of the fiber in paper sheet are aligned in the machine run direction, absorption and de-absorption of moisture by paper causes the change in CD dimension. Such changes in dimension may seriously affect register in printing processes and interfere with the use of such items as tabulating cards. Uneven dimensional changes cause undesirable cockling and curling. Dimensional changes in paper originate in the swelling and contraction of the individual fibers. It is impossible to be precise about the degree of this swelling because paper-making fibers differ considerably in this property, and because the irregular cross-section of fibers creates difficulty in defining diameter. Change that occurs in the dimensions of paper with variation in the moisture content is an important consideration in the use of paper. All papers expand with increased moisture content and contract with decreased moisture content, but the rate and extent of changes vary with different papers. Dimensional stability of paper can be improved by avoiding fiber to absorb moisture. Well sized papers have better dimensional stability.  

 

Typical Values
Grade	MD (%)	CD (%)
Carbonless Paper	0.050-0.150	0.200-0.400
Bond Paper	0.100-0.200	0.200-0.400
Coated Art Paper (under 200 g/m2)	0.090-0.150	0.150-0.350
Gasket Paper	0.400-1.000	0.500-1.100

 Hygroexpansivity: It is the % of elongation or shrinkage caused by a given change in its surrounding relative humidity or its moisture content. It is an indication of a paper's tendency to cause misregister. Hygroexpansivity is important for manufacture and selection of paper for charts and maps requiring hairline register. Formation Formation is an indicator of how uniformly the fibers and fillers are distributed in the sheet. Formation plays an important role as most of the paper properties depend on it. A paper is as strong as its weakest point. A poorly formed sheet will have more weak and thin or thick spots. These will affect properties like caliper, opacity, strength etc. Paper formation also affects the coating capabilities and printing characteristics of the paper. A poorly formed sheet will exhibit more dot gain and a mottled appearance when printed There is no standard method or unit to express formation. It is a relative or subjective evaluation. However when holding paper up to a light source, a well formed sheet appears uniform while a poorly formed sheet has clumps of fibers giving a cloudy look.

 

Not so good formation                   Good formation

Friction Friction is the resisting force that occurs between two paper or paperboard surfaces in contact when the surfaces are brought to slide against each other. This property is measured as a coefficient of friction, which is the ratio of the frictional force, to a force acting perpendicular to the two surfaces. Two components of friction can be measured, these being static and kinetic friction. Static friction is the force resisting initial motion between the surfaces and kinetic friction is the force resisting motion of the two surfaces sliding against each other when already sliding at a constant speed. Measurement of the coefficient of friction has applications in packaging where a high coefficient will indicate that containers such as sacks, bags and paperboard containers will resist sliding in unit loads or on packaging lines. This property is also important in printing papers, since a specific coefficient of friction is needed so that individual sheets will slide over each other, otherwise double press feeding may result. There are two methods of measuring Co-efficient of friction of paper. One, which uses Incline Plane is explained in TAPPI  T815, the second method, which uses Horizontal Plane is withdrawn.

 

Typical Co-efficient of Friction Values Using Horizontal Plane Method
Grade	Static Friction	Kinetic Friction
Office/Business Paper	0.50-0.65	0.35-0.5
Silk Coated Paper	0.45-0.55	0.30-0.45
Gloss Coated Paper	0.40-0.50	0.30-0.40

 Machine and Cross Direction (Directionality of Paper) In paper machine approach flow system, when stock passes through pressure screen, the fibers are oriented lengthwise. If the stock velocity from headbox slice is equal or less than wire speed, fibers which are already oriented lengthwise, will align in the direction of wire run. Fiber alignment can be altered to some extent if stock velocity is less than wire speed. So all papers have a definite grain direction due to greater orientation of fibers in the direction of paper machine run. This grain direction is known as machine direction. The cross direction is the direction of paper at right angles to the machine direction. Some of the properties vary with the MD and CD and hence the values are reported in both the directions. Papers vary in their ratio of MD to CD strengths. Fourdrinier papers generally have from 1.5 to 2.0 times the tensile in the MD compared to CD. Cylinder-machine can have much higher ratio, up to 5.0 or above. The sheet which has all relevant properties same or almost same in both direction are known as 'square sheet'. While sheeting the paper, machine and cross direction are to be kept in mind and the sheet cutting to be done to suit the end use requirements. E.g.1. All printing papers are to be cut in long grain (The biggest dimension in the grain direction).2. Book papers fold better and the book stays open better if the sheets are cut so that the machine direction runs up and down the pages.3. Wrap around labels for metal cans and bottles are to be cut with the machine direction vertical to obtain greater flexibility about the can. Long grain and Short grain : The sheet is in long grain if the larger dimension is parallel to grain (MD) direction. The sheet is said to be in short grain if the larger dimension is parallel to cross direction (CD). There is no sure way to determine the MD or CD of a sheet but one crude method which work is; cut a strip of about 1" wide and 2" long paper and moist it. Put this moist sheet on a smooth surface or hand. As sheet will dry it will curl. The direction of curl is CD as paper contract in CD more than MD while drying. Moisture Almost all grade of paper has some percentage of moisture. Moisture in paper varies from 2 - 12% depending on relative humidity, type of pulp used, degree of refining and chemical used. Most physical properties of paper undergo change as a result of variations in moisture content. Water has the effect of plasticizing the cellulose fiber and of relaxing and weakening the inter-fiber bonding. The electrical resistance and the dielectric constant of paper both vary with moisture content. The absorption and reflectance of certain bands of infrared and microwave radiation by paper are affected by its moisture content. The amount of water present in a sheet of paper is usually expressed as a percent. The amount of water plays an important role in calendaring, printing and converting process. Moisture control is also significant to the economic aspect of paper making. Water comes free. Poor moisture control can adversely affect many paper properties. All strength properties are sensitive to moisture – about 1% change in a sample’s moisture content changes the compression strength with an average of %. The absolute moisture content is expressed as a % of the paper/paperboard weight. The sample is generally not conditioned while doing this test. The standard procedures are laid out in TAPPI T 412 and ISO 287, SCAN P4

 

Typical Moisture Values
Grade	%
Newsprint	7.5 - 9.5
Office/Business Paper	4 -4.5
Marketing Wood Pulp	10
Printing Paper	6 -7
Tissue	2 - 7
Accepted trade tolerance +/- 10%

Smoothness It is most important parameter for printer. Smoothness is concerned with the surface contour of paper. It is the flatness of the surface under testing conditions which considers roughness, levelness, and compressibility. In most of the uses of paper, the character of the surface is of great importance. It is common to say that paper has a "smooth" or a "rough" texture. The terms "finish" and "pattern" are frequently used in describing the contour or appearance of paper surfaces. Smoothness is important for writing, where it affects the ease of travel of the pen over the paper surface. Finish is important in bag paper as it is related to the tendency of the bag to slide when stacked. Smoothness of the paper will often determine whether or not it can be successfully printed. Smoothness also gives eye appeal as a rough paper is unattractive. Smoothness (Bekk Method): This test is an indirect measure of paper smoothness when it is under moderate pressure( 100 kPa). The standards test procedure is described in TAPPI T479. Roughness (Sheffield Method): This test is an indirect measure of paper smoothness or roughness. It is a measurement of air flow between the specimen (backed by flat glass on the bottom side) and two pressurized, concentric annular lands that are impressed in to the sample from top. The standards test procedure is described in TAPPI T538. Roughness (Print-surf Method): Very similar to Sheffield methods. The standards test procedure is described in TAPPI T555.

 

Typical Smoothness Values
Grade	Parker Print Surf (μm)	Bendtsen (mls/min)
Newsprint (40 - 49g/m2)	2.6-4.5	80-140
Stationery (45-135g/m2)	0.8-2.6	50-300
Business Papers (80g/m2)		100-300
Test Liner (186 g/m2)		1750

Temperature and Humidity: Conditioning of Paper As explained above it is important to control the moisture content of paper and keep it stable during converting operation. To keep moisture content constant, it is important that paper is conditioned. Conditioning of paper is also of important in many printing and converting operations. In addition to the effect of moisture content on physical properties, it also determines the build up of static of the paper sheet subjected to pressure and to friction. The tendency for paper to develop static becomes greater with increasing dryness. Cellulose fibers are hygroscopic i.e. they are capable of absorbing water from the surrounding atmosphere. The amount of absorbed water depends on the humidity and the temperature of the air in contact with the paper. Hence, changes in temperature and humidity, even slight changes, can often affect the test results. So, it is necessary to maintain standard conditions of humidity and temperature for conditioning. Wire side and Felt side (Two-Sidedness) Also referred as wire side and top side. The side which is in contact with the paper machine wire during manufacturing is called the wire side. The other side is top side. Before a thin layer of fibers deposit on machine wire, fines and fillers drain out hence wire side has less fines and fillers compared to top side. Certain properties such as smoothness, texture and ink absorbency differ between wire and felt side and it is customary to measure these properties on both sides. This difference of properties on two sides of paper is known as two-sidedness. Highly filled or loaded or paper made from short fiber pulp will show higher two-sidedness. In case of paper to be printed on one side only, best results are obtained by printing on felt side. Postage stamps are printed on wire side and then gummed on felt side, where the smoothness is helpful for attaining an even application. Wire side and top side described above are in reference to single ply paper. In case of multi-ply paper/board, every ply will have wire side and top side. The top side of topmost layer will be top side and wire side of bottommost layer is wire side of multi-ply board. Different type of fibers, fillers and chemicals are used in different layers for techno-economical reasons. The standards procedure is described in TAPPI T455

 

Typical Distribution of Rosin Size through sheet thickness
	Bond	Offset
Basis Weight	75	105
Percent Rosin
Position 1 (Top or felt side)	0.97	0.59
2	0.76	0.58
3	0.59	0.53
4 (Wire side)	0.39	0.36

 

 

Optical Properties

Brightness, Whiteness and Color Brightness may or may not add much value to the 'useful' properties of the paper but it is the most important selling feature. It is a bragging right every paper manufacturer want to have that he/she produces brightest paper. Brightness is defined as the percentage reflectance of blue light only at a wavelength of 457 nm. Whiteness refers to the extent that paper diffusely reflects light of all wave lengths throughout the visible spectrum. Whiteness is an appearance term. Colour is an aesthetic value. Colour may appear different when viewed under a different light source. Brightness is arbitrarily defined, but carefully standardized, blue reflectance that is used throughout the pulp and paper industry for the control of mill processes and in certain types of research and development programs. Brightness is not whiteness. However, the brightness values of the pulps and pigments going into the paper provide an excellent measure of the maximum whiteness that can be achieved with proper tinting. The colour of paper, like of other materials, depends in a complicated way on the characteristics of the observer and a number of physical factors such as the spectral energy distribution of the illuminant, the geometry of illuminating and viewing, the nature and extent of the surround and the optical characteristics of the paper itself. Brightness is measured with two different standards - TAPPI/GE and ISO. Though there is correlation, ISO brightness of a sample is usually lower by 1-1.5 units over GE brightness. The standards are as per TAPPI T 452. Colour is related to perception and therefore measured or specified in terms of color space. A commonly used system is the CIE L,a,b system. This is based on the idea of color opposites. L - measure of luminance and varies from 100 for perfect white to 0 for perfect black.
a - redness to greenness.
b - yellowness to blueness. Whiteness is the extent to which paper diffusely reflects light of all wavelengths throughout the visible spectrum i.e. the magnitude &uniformity of spectral reflectance measured as the percent light reflectance for the whole wavelength range. The procedural standards for the measurement of whiteness are explained in ISO 11475.

 

Typical Brightness Values
Grade	% ISO
Newsprint	62-65
Fully Bleached Pulp	90
Office/Business Paper	80-95
Bond	70-92
Coated Paper	85-90

 

 

American Forest & Paper Association  (AFPA) Brightness Quality Levels
Level	% TAPPI
Premium	88.0 & above
No. 1	85.0 - 87.9
No. 2	83.0 - 84.9
No. 3	79.0 - 82.9
No. 4	73.0 - 78.9
No. 5	72.9 & Below

 

Color The quality of light given off by a sheet as described by its hue (tint), saturation (strength), and value (darkness or lightness).  A whiter sheet reflects equal amounts of red, green, and blue light - the entire visual spectrum.  While most balanced white sheets have a slightly yellowish cast, most people will perceive a sheet with a slightly blue tint to be whiter.

 

Shade:  Shade is a measurement of the color of paper. Shade is defined using a universally accepted color measurement model.Shade represents the subtle differences in color within the visible spectrum.

Technically, shade is an important characteristic within the definition of a paper's whiteness. Shade, particularly in color printing, can directly impact the correct look and feel of the printed images.

Finish It is a broad term to describe the surface characteristics that affect the appearance and feel of the paper. It is a composite property and includes smoothness, gloss, softness, and other less definable properties. Finish is not measured or expressed as a single value, it is subjectively  expressed as High, Medium or Low.

For paperboard finished is designated by numbers ranging from 1 to 4. N0. 4 is highest possible machine finish and No.1 is fairly rough surface.

 

Machine Finish: A finish obtained on the paper machine. It may be high or low.

 

English Finish: This is a special machine finish that is quite high but one which is obtained without too much gloss.

 

Glazed Finish: This finish is obtained by calendering moist paper under high pressure.

 

Machine-glazed Finish: This finish is obtained by drying the sheet against a highly polished metal drying roll known as Yankee Cylinder.

 

Smooth Finish: This finish is obtained by the use of pressure rolls or a breaker stack in the dryer section of the paper machine.

 

Antique Finish: This is rough finish is obtained by not calendering the paper.

 Fluorescence Fluorescence measures the amount of fluorescent whitening agent present in the paper. Optical brightening agent absorbs UV light and re-emits it as visible blue light. Under lighting with a UV component this makes the paper appear more blue and brighter. All high white grades have high levels of optical brightener. Less than 5 fluorescence indicates very little optical brightener is present. Gloss It is the specularly and diffusely reflected light component measurement against a known standard. Gloss is important for magazine advertisements printing . The level of gloss desired is very dependent on the end use of the paper. Gloss and smoothness are different properties and are not dependent on each other. Gloss is the specular reflection of light, which is reflected at an equal and opposite angle. Normally measured at 75⁰ or 20⁰. Generally, gloss of unprinted sheet/ board is measured at 75⁰ (except for cast coated papers). Printed and varnished surfaces are measured at 60⁰ angle. The standard procedures are laid out in TAPPI T 480.

 

Typical Gloss Values
Grade	Gloss at 750
Uncoated Printing Paper	4-6
Matt Coated	10-30
Silk Coated	25-50
Art Coated	65-86

 

Typical Gloss Values compared to Polished Black Glass as 100
Grade	Gloss
Lacquer Coated Paper	96
Magazine Cover	70
Machine Coated Book	51
Supercalendered Book	30
English Finish Book	12
Bond	6
Household Wax Paper	57
Bread Wrapper	63

 Opacity Opacity is the measure of how much light is kept away from passing through a sheet. A perfectly opaque paper is the one that is absolutely impervious to the passage of all visible light. It is the ratio of diffused reflectance and the reflectance of single sheet backed by a black body. Opacity is important in Printing Papers, Book Papers, etc. The opacity of paper is influenced by thickness, amount and kind of filler, degree of bleaching and coating etc. Opacity is measured as the percentage of light absorbed by a sheet of paper. Important in book printing where both sides of paper are printed. The procedural standards are explained in ISO 2471 and TAPPI T425.

A paper with a relatively high opacity at 96% and above will have almost no show- through from printing on the reverse side or the sheet below. Selecting a paper with high opacity is specially important if the printing includes solid block of colors, bold type and heavy coverage.

Typical Diffuse Opacity Values
Grade	Diffuse Opacity %
Newsprint (40-49 g/m2)	90-94
Stationery (50-100 g/m2)	>88
Tracing Paper (60-110 g/m2)	25-40

 

Strength Properties

Bursting Strength Bursting strength tells how much pressure paper can tolerate before rupture. It is important for bag paper. Bursting strength is measured as the maximum hydrostatic pressure required to rupture the sample by constantly increasing the pressure applied through a rubber diaphragm on 1.20 - inch diameter (30.5 mm) sample. The standards procedure is described in TAPPI T 403. Bursting strength depends on basis weight of paper. To normalized the bursting strength for various paper, bursting strength is reported asBurst Index = Bursting Strength (kPa)/ Grammage (g/m²) orBurst Factor = Bursting Strength ( g/cm²)/ Grammage (g/m²) orBurst Ratio = Bursting Strength ( lb/inch²)/ Basis Weight (lbs/ream)

 

Typical Bursting Strength Values
Grade	KPa
Coated Paper (130 g/m2)	200-300
Coated Paper (250 g/m2)	300-650
Bond Office/Business Paper (100 g/m2)	250-300
Carbonless Paper (50-60 g/m2)	150-200
Bleached Kraft (60 g/m2)	210-260
Test Liner (186 g/m2)	250-475

Compressibility It is reduction in paper thickness under compressive forces or pressure. It influences the ability of paper to change its surface contour and to conform to and make contact with the printing plate or blanket during printing impression. This is highly relevant in gravure and letterpress printing. Compressibility is measured as a ratio of roughness under two different standard pressures in a Parker Print Surf tester. Folding Endurance (Double Folds) Double Fold is the paper's capability of withstanding multiple folds before it breaks. It is defined as the number of double folds that a strip of 15 mm wide and 100 mm length can withstand under a specified load before it breaks. Folding endurance is log of double fold at base 10 (Folding Endurance = Log ₁₀ (Double Folds)). Folding endurance has been useful in measuring the deterioration of paper upon aging. It is important for printing grades where the paper is subjected to multiple folds like in books, maps, or pamphlets. Fold test is also important for carton, box boards, ammonia print paper, and cover paper etc. High folding endurance is a requirement in Bond, Ledger, Currency, Map, Blueprint and Record Papers. Currency paper has highest folding endurance (>10,000). Long and flexible fibers provide high folding endurance. The procedural standards for measuring Folding Endurance using MIT tester are explained in TAPPI T511. Hardness The degree to which paper will resist indentation by some other material such as a stylus, pen or printing plate. Hardness is measured with the help of Bendtsen smoothness tester with load on the measuring head. Ply Bond/ Scott Bond The Internal Bond Strength of paper or paperboard (also known as Ply Bond Strength or Z Directional Strength) is the ability of the product to resist splitting when a tensile load is applied through the paper’s thickness i.e. in the Z direction of the sheet. The internal bond strength is often determined on high tack coated Fine papers, offset papers and for multiply papers (e.g. top liner of carton board or abrasive paper used to form belts in grinding machines). One particular application is determining the ply bond strength of “Peelable”  The interlayer strength of the paperboard, measured on Scott Bond Tester, expressed in J/m2. The standard procedures are explained in TAPPI T 403 & T569 & SCAN P80. In paper, it is a measure of the internal strength of the sheet. 

Typical Scott Bond Values
Grade	J/M2
Cover Paper	125-230
Offset Paper	240-290
Xerographic Paper	220-400
Coated Cover Paper	200-315
Coated Text	240-365

Resiliency The ability of paper to recover its original thickness and surface contour after release of the compressive forces of printing nips. A paper’s resiliency depends on a number of factors, especially related to the papermaking process, like quality of fiber refining, calendaring, supercalendering etc., besides other parameters like density, moisture etc. The ’ Printing Cushion’ of a paper is governed or defined by the combination of its degree of resiliency, compressibility, and hardness/softness. Resiliency is a key point of consideration in ‘ letterpress’ & ‘gravure printing’.

 

Softness: Softness is the lack of hardness when paper is crumbled in hand. Softness is also used in opposition to hardness as evaluated by compressibility. Softness is an important attribute of sanitary tissues, facial tissues and towelling, where it is related to the feel of paper against the skin. Softness is important in glassine and wax papers, in which it is related to the ease of folding.

 

Hardness and Compressibility: Hardness is the property of paper that causes it to resist indentation by another material.  Normally a soft cooked pulp will produce soft paper and vice-versa. Compressibility is defined as the reciprocal of the bulk modulus. It can be measured under static load by determining the change in caliper of the sheet under and expressing the results as a function of pressure.

 Stiffness Stiffness is the measure of force required to bend a paper through a specified angle. Stiffness is an important property for box boards, corrugating medium and to certain extent for printing papers also. A lumpy and flimsy paper can cause feeding and delivery problems in larger sheet presses. A sheet that is too stiff will cause problems in copier machines where it must traverse over, under, and around feed rollers. Bond papers also require certain stiffness to be flat in typewriters etc. Stiffness (Taber): A measure of flexural rigidity, Stiffness is the bending moment (g-cm or mNm) required to deflect the free and of a 1.5 in wide vertically clamped sample 15⁰ from its center line when load is applied 50 mm away from the clamp; measured in MD &CD. The procedural standards are explained in TAPPI T 489 and ISO 2491.

Droop Rigidity CD: Droop rigidity measures the stiffness of the paper or board, more often applied to lighter weight grades. CD refers to cross direction, and MD to machine direction, Droop rigidity is higher in the machine direction. The higher the value the stiffer the paper.

Droop Rigidity MD: Droop rigidity measures the stiffness of the paper or board, more often applied to lighter weight grades. CD refers to cross direction, and MD to machine direction, Droop rigidity is higher in the machine direction. The higher the value the stiffer the paper.

Bending Resistance/ Stiffness (Lorentzen &Wettre): It is a measure of the resistance offered to a bending force by a rectangular sample, expressed in mN (milli Newtons). The standards are as per TAPPI T 556.

Typical Bending Values
Grade	Bending Moment Stiffness (mNm)		Resonance Length Stiffness (mNm)
	MD	CD	MD	CD
Coated Paper (135 g/m2)	65	45	1043	721
Office/Business Paper (80 g/m2)	39	17	493	160
Carbonless Paper (46 g/m2)	7.5	3.3	76	34

 Stretch (Elongation) Stretch is the amount of distortion which paper undergoes under tensile stress. Stretch elongation is usually expressed, as percent stretch to rupture. Stretch can be related to the paper's ability to conform and maintain conformance to a particular contour, e.g. Copier paper, multicolor offset printing papers, liquids packing cartons base papers etc. It is an important property in sack kraft papers which are used for cement bags etc. Stretch is higher in cross direction than machine direction. The tensile strain developed in a test sample at maximum tensile strength before rupture, measure as the % increase in the length of the sample to the original length. The procedural standards are explained in TAPPI T 494 Surface Strength (Wax Pick No.) A measure of the surface strength of the sample or surface resistance to picking. Pick occurs due to poor internal bonding strength, making it susceptible to adherence to grade wax sticks (Dennison). This test is valid only for uncoated board or paper. For Coated stock IGT pick test is applicable. Acceptable pick level for uncoated papers =>Wax  #6Acceptable pick level for Gloss papers =>Wax  #11 IGT is a measurement of the surface strength of the paper. A tacky ink is applied to sample of the paper at an increasing speed. As the speed increases the peeling force applied to the paper also increases and the speed at which the fibers begin to be pulled from the sheet is recorded as the IGT. A high IGT (>300) indicates a strong surface strength suitable for demanding offset applications. Tearing Resistance (Strength) Tearing resistance indicates the behaviour of paper in various end use situations; such as evaluating web runnability, controlling the quality of newsprint and characterizing the toughness of packaging papers where the ability to absorb shocks is essential. fiber length and inter-fiber bonding are both important factors in tearing strength. The fact that longer fibers improve tear strength is well recognized. The explanation is straight forward; longer fibers tend to distribute the stress over more fibers and more bonds, while short fibers allow the stress to be concentrated in a smaller area.
Tearing Resistance: Tearing resistance/ strengths is the ability of the paper to withstand any tearing force when it is subjected to. It is measure in both MD & CD, expressed in mN (mili Newton).
 Tear Factor: TAPPI standards require that the tear factor be expressed in units of dm² . If the tearing strength = a g_f and that the basis weight = b g_f/m².  The tear factor is then 

Tear Factor = (tearing strength)/(basis weight) = 100*a/b dm²

 Tear Index:, like tear factor, is defined as tearing strength divided by basis weight.  The tear index, however, must be expressed in units of mN/(g_f/m²).  As before, suppose that tearing strength = a g_f and basis weight = b g_f/m².  The tear index is then given by

Tear Index   =   (tearing strength)/(basis weight) = 9.81*a/b mN/(g/m2)

  The procedural standards are explained in TAPPI T 414, ISO 1974 & SCAN P11

 

Typical Tear Resistance Values
Grade	Elmendorf Tear mN
Coating Base (80g/m2)	500 - 700
Bond (100g/m2)	700
Office/Business Paper (80g/m2)	500 - 600
Test Liner (186g/m2)	1800

Tensile Strength The tensile force required to produce a rupture in a strip of paper or paperboard, measured in MD & CD, expressed in kN/m. Tensile strength is indicative of fiber strength, fiber bonding and fiber length. Tensile strength can be used as a potential indicator of resistance to web breaking during printing or converting. The procedural standards are explained in TAPPI T 494.

 

 

Tensile Properties of some paper grades
Grade	Tensile Strength (kN/m)		Breaking  Length (KM)		Stretch (%)		TEA (kJ/m2)
	MD	CD	MD	CD	MD	CD	MD	CD
Offset (107 g/m2)	5.6	3.2	5.3	3.1	2.5	4.1	14.9	15.8
Bond (75 g/m2)	3.6	2.6	4.9	3.5	1.8	4.7	6.3	13.2
Newsprint (50 g/m2)	1.8	0.9	3.7	1.8	1.1	1.4	1.8	13

  Breaking Length: It is the length of paper strip, if suspended vertically from one end, would break by its own weight. Breaking length is generally used in the paper trade to characterize the inherent strength of paper.  It affords an excellent basis for comparing the strength of papers made from different furnishes and having different basis weight.

                                Breaking Length (km) = 102*T/R or 3.658*T¹/R¹

                                T = Tensile Strength, kN/m
                                T¹= Tensile Strength, lb/inch
                                R = Basis Weight, g/m²
                                R¹= Basis Weight, lb/1000 ft²

Tensile Energy Absorption (TEA): TEA is the Tensile Energy Absorption, i.e. the amount of work required to break the sheet under tension.Tensile Index (TI): It is the tensile strength in N/m divided by basis weight in g/m² Grammage. TI is expressed in Nm/g

                                Tensile Index (Nm/g) = 1000*T/R or 36.87*T¹/R¹

                                T = Tensile Strength, kN/m
                                T¹= Tensile Strength, lb/inch
                                R = Basis Weight, g/m²
                                R¹= Basis Weight, lb/1000 ft²

Typical Tensile Index Values
Grade	MD (Nm/g)	CD (Nm/g)
Newsprint (40 - 49g/m2)	45 -60	-
Stationery (50-100 g/m2)	40-70	20-40
Tracing Paper (60-110 g/m2)	70	40
Test Liner (186 g/m2)	175	80

Z Direction Tensile Strength: Or internal bond strength provides an indication of strength of board in relation to glue bonding at carton side seams and possible Delamination on scoring, or use of high tack coating. The procedural standards are explained in TAPPI T 541.

Zero SpanTensile Strength (Paper): This provide an idea of tensile strength of fiber and not the strength of fiber bonding. The gauge length of the tensile strength measuring instrument is set to zero so the failure is by fiber rapture only. It is measured with a strip of paper but mainly a pulp property.

 

Comparison of Individual Fiber Strength, Zero Span Tensile strength and Tensile Strength of Handsheets.
Fiber Type	Average Fiber Length (mm)	Tensile Strength of Handsheet (MPa)	Zero-Span Tensile Strength (MPa)	Fiber Strength (MPa)	Ratio of Zero-Span to Fiber strength
Douglas Fir (Unbeaten)	3.7	78	257	627	0.410
Southern Pine (Beaten)	3.3	83	207	590	0.351
Sweetgum (Beaten)	1.7	46	227	526	0.432
Sweetgum (Unbeaten)	1.7	8	217	665	0326

Wet Strength Some grades of paper such as tea bag paper, coffee filter paper etc. come in contact with water in use. So these paper have to be strong enough to withstand tear, rupture or falling apart when saturated with water. To impart wet strength, paper are treated chemically.

 

Typical Wet Tensile Strength Values
Grade	Dry Tensile Strength (g)	Wet Tensile Strength (g)
Kitchen Towel  (20g/m2), 2 ply	650	200
Facial Tissue (13g/m2) 2 ply	115	35

Miscellaneous Properties

Ash Content The residue left after complete combustion of paper at high temperature. It is generally expressed as percent of original test sample and represents filler content in the paper. As it is ash content is not important property of paper but in some grade of papers such as filter papers are ash free and other such as cigarette tissue have certain level of filler to control cigarette burning rate. The ash content measurement procedural standards are explained in TAPPI T 413, SCAN P5, ISO 1762.

 

Typical Ash Content Values
Grade	%
Market Wood Pulp	0.3 - 0.5
Newsprint	0 - 12
LWC	30 - 50
Fine Paper	0 - 35

Dirt Content The paper may have number of dirt specks or contraries. These specks can be any unwanted foreign particle that is visible to the eye such as bark, undigested wood (shives), pitch, rust, plastic, slime etc. For pulp, paper and board the number or area covered by such specks on both surfaces and sometimes in the body of the material, can be estimated in either reflected or transmitted light.

The number of specks of each area are expressed either as mm²/Kg for pulp or mm²/m² for paper

 

Typical Dirt Content Values
Grade	%
Bleached Market Wood Pulp	< 7 mm2/Kg
Newsprint from deinked pulp	100-300 ppm
Fine Paper from deinked pulp	< 10 ppm

 Electric Properties Paper is used for cable wrapping, dielectric media in capacitors and other electric application. The following electric properties are important for paper to be used in electrical applications. Conductance: Electrical conductivity is the ability of a material to carry the flow of an electric current (a flow of electrons). Paper is classified as bad conductor or insulator. Dielectric Constant or Relative Permittivity  is the ratio of the permittivity of a substance to that of free space or vacuum. The dielectric constant of paper varies from 2 to 5. Dielectric Strength: of an insulating material is the maximum electric field strength that it can withstand intrinsically without breaking down. Dielectric strength of Waxed paper is 40-60 Million Volt/m or 40-60 KV/mm. For a paper of 0.1mm thick, the dielectric strength will be 4-6KV.

 

Dielectric Properties of Cellulose and Paper
Sample	Dielectric Constant	Power Factor	Resistivity (Ohms/cm)	Dielectric Strength	Density
100% Cellulose	8.1	-	10^18	250x10^5	1.56
Paper	1.2 -4.0	0.001-0.002	10^18	2x10^5	0.2 - 1.2

 

pHThe pH value of paper can show residual acidic/alkaline chemicals in pulp, or atmospheric pollutants (e.g. SO₂) in valuable paper archives. 

The pH value of paper can be determined by:

- Disintegrating the paper in hot distilled water  and determining the pH of the extract. - Disintegrating the paper in cold distilled water  and determining the pH of the extract.
- Directly using a wet electrode on the paper surface.

These 3 methods measure different solutions and so give different pH values.

 Permanence & Durability Permanence is degree to which paper resists deterioration over time. Permanent paper can resist large chemical and physical changes over and extended time (several hundred years). These paper are generally acid-free with alkaline reserve and a reasonably high initial strength. Paper containing pure cellulose fiber are more permanent. Permanency is desirable in currency, bond and record papers. The permanence and durability are two distinguish properties of paper. Permanence is basically a measure of the chemical stability of paper. Durability, on the other hand, is primarily a function of the performance of paper; it is a measure of the stability of its physical and mechanical properties . A paper that is given rough treatment over a short time should be durable, but little concern need be given to permanence. A paper that is meant to last for a century must be compounded for chemical stability. Such chemical stability can be enhanced by storing paper at a low temperature; at a constant, low relative humidity; in the dark; and in an atmosphere free of pollutants . But if the paper is also to be used--read, handled, folded, etc.--it's mechanical durability is also important . Obviously, permanence and durability are not independent of each other, but rather intimately related. This relationship is so intimate, in fact, that durability or the stability of the strength and mechanical properties of paper has become the most useful indicator of its permanence or chemical stability . Pin Holes Imperfections in paper which appear as minute holes upon looking through the sheet. They originate from foreign particles, which are pressed through the sheet. Absence of pin hole in electrical grade papers is very important. Porosity Since paper is composed of a randomly felted layer of fiber, it follows that the structure has a varying degree of porosity. Thus, the ability of fluids, both liquid and gaseous, to penetrate the structure of paper becomes a property that is both highly significant to the use of paper. Paper is a highly porous material and contains as much as 70% air. Porosity is a highly critical factor in Printing Paper, Laminating Paper, Filter Paper, Cigarette Paper, Bag Paper, Anti-tarnish Paper and Label Paper. Porosity is the measurement of the total connecting air voids, both vertical and horizontal, that exists in a sheet. Porosity of sheet is an indication of absorptivity or the ability of the sheets to accept ink or water. Porosity can also be a factor in a vacuum feeding operation on a printing press. Air Resistance (Gurely Method): It is the resistance to the passage of air, offered by the paper structure, when a pressure difference exist between two sides of paper. It is measured as the time for a given volume of air to flow through a specimen under specified conditions. Air resistance is indirect indicator of degree of beating, compaction of fibers and type and amount of fillers. The Gurely Method is explained in TAPPI T 460 and TAPPI T 536 for low and high air resistance respectively. Air Resistance ( Sheffield Method): is explained in TAPPI T 547 

Typical Porosity Values
Grade	Gurley Air Resistance (sec)	Bendtsen (mls/min)
Uncoated Paper		500-1500
Coated Paper		0-10
Test Liner (186 g/m2)		25
Gasket		1-5
Blotting Paper	1 -2

Print Quality

The degree to which the appearance and other properties of a print approach a desired result. Lot of parameters in paper surface like roughness, gloss, ink absorption, whiteness, brightness affect this. Printability The extent to which properties of paper lends them to the true reproduction of the original artwork. This is influenced by the printing process and can be evaluated in terms of - dot reproduction, dot gain, print gloss, hue shift and print uniformity. Sizing / Cobb Because paper is composed of a randomly felted layer of fiber, it's structure has a varying degree of porosity. Thus, the ability of fluids, both liquid and gaseous, to penetrate the structure of paper becomes a property that is both highly significant to the use of paper. The need to limit the spreading of ink resulted in "sizing" the paper with gelatinous vegetable materials which had the effect of sealing or filling the surface pores. Later, the term "sizing" was applied to the treatment of paper stock prior to the formation of the sheet, with water-repellent materials such as rosin or wax. Resistance towards the penetration of aqueous solution / water is measured by Sizing or Cobb values.The surface water absorption over 60 seconds, expressed in g/m2, measured by Cobb Test. The procedural Standards are explained in TAPPI T 441.

 

Typical Cobb Values
Grade	g/m2
Bond	24-30
Office/Business Paper	22-26
Test Liner (186 g/m2)	100
Unsized	50+
Carbonless Base	18-22

Thermal Properties of Paper Thermal Conductivity of Paper:

Thermal conductivity is a measure of how easily heat passes through a particular type of material. Thermal conductivity is measured in watts per meter Celsius. Because the conductivity of materials can vary with temperature, no one single value exists for the conductivity of paper. However, under standard temperature and pressure of 25 degrees Celsius and 1 atmosphere, the thermal conductivity of paper is 0.05 watts per meter Celsius or 0.03 BTU ft/hour. Sq. ft ⁰F.

Specific Heat Capacity of Paper:  The specific heat capacity of a material is a measure of the amount of energy required to raise the temperature of a specific quantity of that material by a specific amount. The units of specific heat capacity are Kilojoules per Kilogram Celsius. The specific heat capacity of paper is 1.4 Kilojoules per Kilogram Celsius or 0.33 Btu/lb/⁰F.

 Water Absorption (EDGE WICK) Water absorption at the edge, expressed in kg/m2, using Wick Test. Board surface is sealed with waterproof tape on both sides, weighed, placed in water @ 80^oF for 20 minutes and weighed again to measure the water absorbed by wicking. It is an important test for measuring the water absorption capacity of cupstock grade, which is used for the manufacture of soft drink cups.

CORRUGATED BOARD

Corrugated Boards - Bursting Strength The combined tensile strength and stretch of a material as measured by the ability of the material to resist rupture when pressure is applied under specified conditions to one of its sides by an instrument used for testing the property. Testing for the bursting strength of paper is a very common procedure, although its value in determining the potential permanence or durability of paper is suspect.Corrugated Boards - Ring Crushed Test  Ring Crush is a traditional test of linerboard and corrugating medium strength.  Ring crush measures compression resistance, and this compression strength is considered to relate to the eventual compression strength of combined board made from the component. Linerboard called high strength or high performance linerboard is board that is able to achieve a specified minimum ring crush at basis weights that are lower than traditional basis weights. Corrugated Boards - Concora Crush Test  The Concora Crush Tester performs a series of tests to determine the rigidity and crush resistance of corrugated material. It is used in conjunction with the Concora Liner Tester. The first test measures the flat crushing resistance of a laboratory-fluted corrugated material. The second test determines the edgewise strength, parallel to the flutes, of a short column of single-, double-, or triple-wall corrugated board. The third test evaluates the ability of corrugated material to contribute to the compression strength of a corrugated box by measuring the edgewise compression strength of a laboratory-fluted strip of corrugated material in a direction parallel to the fluted tips. Corrugated Boards - Flat Crush Strength  The flat crush test is a measure of the resistance of the flutes in corrugated board to a crushing force applied to the surface of the board under prescribed conditions. Flat crush is a measure of the flute rigidity of corrugated board. A high flat crush value indicates a combination of good flute formation and at least adequate strength medium. Low flat crush may indicate a number of ctionluding low strength medium, leaning flutes and crushed flutes.

Test	TAPPI	*Related ISO Method	*Related ASTM
Abrasion, Taber	T 476
Absorption, Castor Oil	T 462		D 780
Absorption, Water Drop	T 432		D 824
Alkaline Reserve	T 553		D 4988
Ash	T 211 T 413, T 244	2144	D 586
Basis Weight (Grammage)	T 410	536	D 646
Brightness of Clay Fillers or Slurry	T 646
Brightness, Diffused	T 525	2469, 3688
Brightness Paper, Pulp, Filler or Slurry, ISO	T 571 (Withdrawn)	2469, 2470
Brightness, TAPPI	T 452	2469, 2470	D 985
Bulk or Density	T 220 (Physical Testing of Pulp Hand sheets)	5270
Burst, Mullen	T 403,  T 807	2758	D 774
Caliper	T 411	534, 3034	D 645
Cobb Size	T 441	535	D 3285
Coefficient of Friction, Horizontal	T 549	15359	D 4917
Coefficient of Friction, Slide Angle	T815
Color, Hunter, L,a,b or CIE L*,a*,b*, ISO	T 527
Color, Hunter, L,a,b or CIE L*,a*,b*, TAPPI	T 524
Dirt Count	T 563		D 6101
Edge Crush, ECT	T 811	3037
Fiber analysis of paper and paperboard	T 401	9184 (5 parts)	D1030
Flat Crush	T 808	3035
Fluorescent Component, TAPPI	T 452	2469, 2470	D 985
Fold, MIT Fold, MIT	T 511	5626	D 2176
Fold, Schopper	T 423	5626	D 643
Gloss, 200	T 653		D 523
Gloss, 750	T 480	5284 -1	D 1223
Handsheet Testing	T 220 (Physical Testing of Pulp Hand sheets)	5270
Hercules Size, 1% acid/ 80% reflectance	T 530
Hercules Size, 10% acid/ 85% reflectance	T 530
Ink Rub Resistance, Sutherland	T 830
Machine Direction of Paper	T 409		D 528
Moisture Content	T 412	287	D 644
Opacity, ISO	T 519	2471
Opacity, TAPPI or Printing	T425	2471	D 589
pH Hot Extract	T 435	6588	D 778
pH Cold Extract	T 509	6588	D 778
pH Surface	T 529
Peel, Thermoplastic coating adhesion	T 540
Permeability (Air Perm)	T 251
Petroleum Wax in Impregnated Paper	T 405		D 590
Porosity, Gurley	T 460	5636-5	D 726
Ring Crush	T 818	12192	D 1164
Rosin in Paper	T408
Roughness, Parker Print-Surf	T 555	8791/4
Roughness, Sheffield	T 538	8791/3
Scott Bond	T569
STFI Short Span Compressive Strength	T 826	9895
Starch in Paper	T 419		D 591
Stiffness, Gurley	T 543	5628	D 6125
Stiffness, Taber	T 489 or T 566	2493	D5342, D5650
Tear Resistance, Elmendorf	T 414	1974	D 689
Tensile Breaking Strength & Elongation	T 404	1924/1
Tensile	T 494, T 456	1924/2	D 828, D829
Water Vapor Transmission Rate	T 448	2528	E 96, E398
Wax Pick	T 459		D 2482
Water vapor transmission rate	T 448	2528	E 96, E398
Wire side identification	T 455		D 5039
Z-Direction Tensile	T 541

* “Related” does not imply “equivalence.” A “Related Standard” may be a standard for a similar property, but this should not assume identical technical content or matching results.

Go to http://www.tappi.org/content/pdf/standards/subject_index_tms.pdf for a complete list of TAPPI testing standards.

Reporting Units for Physical Testing Procedures for Paper Testing

Testing procedure1	Standard		Present reporting unit2	Suggested SI metric reporting unit	Conversion factors
	ASTM	TAPPI
Air resistance (Gurley)3	D726	T460	sec/100cm3	sec/100cm3
Basis weight (grammage)	D646	T410	lb/480 or 500-sheet ream	g/m2	ream weight (il/500 sheets4) X 1,406 ----------------------------------------------------- = sheet area in square inches
Bulking thickness	D527	T426	in.	mm or µ m	1 point = 0.001 in. = 0.0254mm = 25µ m
Bursting strength	D774		lb/in2 (psi)	kPa, kgf/cm2	1 psi = 6.895 kPa
Caliper (thickness)	D645	T411	thousandths of inch (mil)	mm or µ m	1 point = 0.001 in. = 0.0254mm = 25µ m
Ply adhesion	D825		gf/cm width	mN/cm width	gf/cm = 9.8066 mN/cm
Standard paper conditioning	D685	T402
relative humidity  Temperature			50 ±2% 23 ±2°C
Stiffness		T451	mgf Tber unit	mN mN	1 mfg = 9.8066 x 10-3 mN 1 Taber unit = 2.03 mN
Gurley Taber		T451	mgf Tber unit	mN mN	1 mfg = 9.8066 x 10-3 mN 1 Taber unit = 2.03 mN
Tear
Edge tearing strength Internal tearing resistance	D827 D689	T470 T414	kgf gf/number plies	N mN	1 kgf = 9.8066 N 1 gf = 9.8066 mN
Tensile breaking strength: Paper and paperboard	D828	T404	il/0.5 in. width or kgf/15mm width	newton/meter width, N/m width	kgf/15mm = 0.65378 kN/m ibf/0.5 in. = 0.53574 kgf/15mm
Tensile energy absorption		T494	kgf * m/m2	J/m2	kgf * m/m2 = 9.8066 J/m2
Water absorption test (Cobb)		T441	g/m2	same or kg/m2
Bulk			cm3/g	same or m3/kg
Burst factor (index)			gf/cm2 g/m2	kPa * m2/g	1 gf/cm2 = 0.098066 kPa *m2/9    g/m2
Density			g/cm3	g/cm3
Tear factor (index)			100 gf * m2/g	mN * m2/g	100gf * m2 = 9.8066 X 102 mN * m2/g         g

¹Many physical testing units will not be changed by the conversion to metric or SI units.  Thus, such tests as brightness (%), compressibility (%), Standard Freeness (ml), opacity (%), and stretch (%) will continue to be reported in the dame units.
²Most of the suggested reporting units in SI metric terms are based on recommendations from the British Paper Makers' Association.
³Some properties will continue to be reported in present units.  Thus, such procedures as the Bendtsen air resistance and smoothness tests and the Sheffield smoothness test will continue to be reported in ml/min.
⁴If the given trade size is in 480 sheets, then factor shall be multiplied by 48/50 (or 0.960).

 

Source: paperonweb.com